You may have heard about Roku a lot recently. The reason for its popularity is its exceptionally made devices for smart and non-smart televisions. Roku has manufactured many digital hardware devices that enabled the users to cast media or stream online or even browse the internet.
However, not everything could be perfect. The same is the case with the Roku remote. If you are one of the people who are panicking due to their Roku volume not working then look no further because this article has all that you need to fix your Roku volume control not working issue.
What is Roku?
Let’s know a bit about the company. An American company called Roku, Inc. manufactures hardware digital media players under the Roku brand. These devices allow users to stream media content from online sources. Roku’s first model was announced in May 2008, developed in cooperation with Netflix. It has been since then it came into frequent use.
Why does the Issue Occur?
There could be multiple reasons that could be contributing to Roku volume not working. All you have to do is to get to the root of the problem you are facing. Following are some common problems tha6t can hinder the normal functioning of the Roku remote.
Wiring has always been the main cause in digital devices, Sometimes it breaks or sometimes it just stops passing the electric current leading to not working of the device, Similar is the case with Roku remote. The most recurrent issue that customers have complained about is the wiring. There is an 80% chance that your Roku volume control not working issue has been caused by the HDMI connection that is used to connect your tv with the device. Either your cable is loosely attached or damaged from some point which is causing the device to shut down. Also, there could be an issue with your HDMI port. It could have been damaged when you forcefully tried to put the wire in. Therefore, you have to make sure you work smoothly with the wires. If these are the issues then it is recommended to get a new wire.
Incorrect Audio Output
Another possible reason for the error in the working of Roku is that you may have the incorrect audio input. Roku and TV are both capable of displaying videos in 720p, so the problem may also lie with their settings. Audio will not be heard from computers that are operating on the wrong audio output channel.
How to Fix Roku Remote Volume Not Working issue?
Every problem needs a solution and almost every problem in the world already has a solution to it. Below are some pointers that can help you fix your Roku volume not working issue.
Press Buttons Randomly
If you press the remote button randomly in the hope of being able to solve your problem, it might seem childish or strange to you. Sometimes, oily fingers cause liquids or dust to collect on the remote controls, rendering them unusable.
Remove the batteries from the remote and press every button on the remote for 2-3 seconds, then randomly press each button again after you have finished pressing all of them. Keep going until you have done it all.
A list of steps you have to repeat many times in a row must be prepared for you to complete. This solution will help you solve your problem without any doubts. If this solution did not solve your problem, then try the next one. If this solution did not solve your problem, then try the next one.
Change the batteries
There are some chances that the remote batteries are inserted loosely. Try to remove the batteries and put them in again.
Follow these steps to unpair your Roku remote:
- Simply press and hold the Home, Back, and Pairing buttons at the same time.
- The LED indicator will blink three times before you release the buttons.
- The Roku remote will then be unpaired. To double-check, press a few button combinations randomly. Nothing will happen.
This is what you need to do to re-pair the Roku remote to the device.
- You will have to turn the Roku device off.
- Take the battery out of the remote.
- Power Roku on.
- Then, replace the remote’s batteries.
- Pair the remote.
- Press until the light flashes.
You will have to wait a few seconds for the pairing process to complete.
Is Your Remote Overheating?
The remotes for Roku TVs may sometimes stop working because of overheating, which is probably what causes these problems. If you start feeling the heat coming from the back of your Roku remote, you should stop using it. Give it a couple of minutes to cool down before continuing to use it. Due to the overheating that occurred during storage, there is a high probability that the volume rocker is not functioning properly.
In order to avoid this, it is advised that you place the remote on something hard, such as marble or tile, and let it cool down for a while. The batteries should not be removed if the remote is still warm at this time.
The remote codes for different TV models vary. Roku Player uses this method so that the remote control will be programmed with the correct code so that the Roku Player setup is as convenient as possible.
The system, however, picks a code that controls only either volume or power, not both at the same time. Using different codes for different brands of TV will help you overcome this problem. The steps below will help you try another remote code for your Roku remote.
- On the home page, click Settings. From there, you will be able to select “Remote” and “Devices.”
- Choose the “Remote” tab and then select “Gaming Remote,” then choose “Set the remote for TV control.”
- Setting it up may take some time. Then, it will ask whether you listen to music.
- After that player will ask you if the music is playing it will be the time when you have to answer the question.
- By selecting ‘no’ as an answer, the player will move to the next remote code.
- Rather than answering “no,” you answer, “yes.” when you are asked to turn off the music.
The process above can be repeated several times until you land on the code with no commands for both volume and power when using the Roku Enhanced Remote. You might have to repeat this several times before finding the code without any commands.
Out of that many solutions, there is a chance that any one of them might have worked for you. However, if the Roku volume control not working error is persistent then you may need to seek professional help or you can try repeating the above-mentioned steps two to three times. We would love to hear if this method worked for you or if you need further assistance you can contact us at Brothers Guide